R
EVISED
2016-01-19
PREFACE
Purpose
This manual gives specific information on how to apply and use the CIP™ functions
on the N-Tron® series 700/7000 switches.
Audience
The manual is intended for use by personnel who are responsible for operating and
maintaining network equipment; consequently, it assumes a basic working knowledge
of general switch functions and the Internet Protocol (IP).
Trademark
Acknowledgments
Red Lion Controls acknowledges and recognizes ownership of the following
trademarked terms used in this document.
•
Ethernet™ is a registered trademark of Xerox Corporation
•
EtherNet/IP™and CIP™ are registered trademarks of ODVA™
•
All other company and product names are trademarks of their respective
owners
Conventions
The following conventions are used throughout this manual to show information:
Note: Emphasizes important information or calls your attention to related
features or instructions.
Related Publications
and Document
Updates
This document is revised only at major releases and therefore, may not always
contain the latest product information. As needed, Tech Notes and/or other product
documentation can be provided between major releases to describe any new
information or document changes.
Also, as part of the 700 software, there is an online web-based help that describes all
management related features.
N-Tron® Series 700/7000 Switch CIP™ Manual
v