R
EVISED
2016-01-19
Bit 10: Port Utilization Alarm
Bit 11: Temperature Alarm
7
IGMP Querier
Status
USINT (8)
Query Status:
0 = Disabled, 1 = Active (manual), 2 = Active
(Auto), 3 = Backup (Auto) [enabled but not active].
8
IGMP Version
USINT (8)
IGMP Version (V1, V2, V3, etc).
9
IGMP
Resource
Usage
USINT (8)
Percent of maximum capacity. Takes into account
the number of groups used per max groups and any
other possible resource limitations (0-100).
10
IGMP Active
Querier
UDINT (32)
IP of the active IGMP querier.
11
CPU Usage
USINT (8)
Percent of usage (0-100).
12
Class 1
Connections
UINT (16)
Number of CIP Ethernet/IP class 1 (multicast)
connections.
13
Class 3
Connections
UINT (16)
Number of CIP Ethernet/IP class 3 (unicast)
connections.
14
Temperature
Alarm Upper
Threshold
Set
INT (16)
Upper temperature (C) at which to declare an alarm
15
Temperature
Alarm Lower
Threshold
Set
INT (16)
Lower temperature (C) at which to declare an alarm
16
Contact Status
BYTE (8)
2 Bits per contact. 00=Not Present, 01=Open,
10=Closed.
17
Temperature_C
INT (16)
Temperature in degrees C. 0x7FFF = Not Supported
on device.
18
Temperature_F
INT (16)
Temperature in degrees F. 0x7FFF = Not Supported on
device.
19
Reset MIB
Counts
Set
LWORD (64)
Reset port MIB counters. (1 bit per port to reset).
20
Device MAC
Address
ARRAY of 6
USINTs (8)
MAC address of device
21
Device Role
UDINT (32)
Bit mask of device roles. Bits=
0 = N-Ring Manager
1 = N-Ring Member
2 = N-Ring AutoDetect
3 = N-Link Master
4 = N-Link Slave
5 = N-Link Coupler
22
Config Device
Status
BYTE (8)
0 = Not Supported, 1 = Not Present, 2 = Present
23
System
Configuration
Set
UDINT32
Bit mask of system config. Bits=
Bit 0: GET: Changes have been made that have not
been saved.
SET: Save system configuration to flash.
Bit 1: GET: Changes have been made that require a
reboot to take effect.
SET: Shutdown and reboot device
Note: SET feature will be removed in a future
release.
N-Tron® Series 700/7000 Switch CIP™ Manual
-9-