Red Heating SELECTA 30 S1, Инструкция по эксплуатации и уходу

Страница: 27 / 40

27
F
E
T
V
TEMPERATURA PERICOLOSA
27
13 - MAINTENANCE AND CLEANING
Technical Dept. - All rights reserved - Reproduction prohibited
Disconnect the product from the 230V power supply before performing any maintenance operations.
DAILY OR WEEKLY CLEANING PERFORMED BY THE USER
If the pellets in the tank run out, unburnt pellets may accumulate in the brazier.
Check the status of your brazier every 15 days.
REMEMBER THAT ONLY A BRAZIER THAT IS CLEANED CORRECTLY CAN GUARANTEE SAFE IGNITION AND OPTIMAL
OPERATION OF YOUR PELLET PRODUCT. IN CASE OF FAILED IGNITION AND AFTER ANY OTHER LOCKOUT STATUS OF THE
PRODUCT, IT IS ESSENTIAL TO EMPTY THE BRAZIER BEFORE STARTING IT BACK UP AGAIN.
For the brazier to be cleaned properly, remove the ash from its housing and thoroughly clean all the holes and the grate on the bottom.
If you use good quality pellets, you will normally only need to use a brush to restore the component to perfect condition. For tougher
incrustations, use the steel tool provided as per standard with the boiler.