Red Hat ENTERPRISE LINUX AS 2.1 -, Руководство по установке

Страница: 50 / 210

50 Chapter 3:Installing Red Hat Enterprise Linux AS
Figure 3–8 Creating a New Partition
•
Mount Point
: Enter the partition’s mount point. For example, if this partition should be the root
partition, enter
/
; enter
/boot
for the
/boot
partition, and so on. You can also use the pulldown
menu to choose the correct mount point for your partition.
•
Filesystem Type
: Using the pulldown menu, select the appropriate filesystem type for this parti-
tion. For more information on filesystem types, see Filesystem Types in Section 3.12.5.
•
Allowable Drives
: This field contains a list of the hard disks installed on your system. If a hard
disk’s box is highlighted, then a desired partition can be created on that hard disk. If the box is not
checked, then the partition will never be created on that hard disk. By using different checkbox
settings, you can have
Disk Druid
place partitions as you see fit, or let
Disk Druid
decide where
partitions should go.
•
Size (Megs)
: Enter the size (in megabytes) of the partition. Note, this field starts with a "1" (one);
unless changed, only a 1 MB partition will be created.
• Additional Size Options : Choose whether to keep this partition at a fixed size, to allow it to
"grow" (fill up the available hard drive space) to a certain point, or to allow it to grow to fill any
remaining hard drive space available.