Red Hat ENTERPRISE LINUX 3 - FOR IBM ESERVER ISERIES AND IBM ESERVER PSERIES Скачать руководство пользователя страница 11

Страница: 11 / 80

Chapter 1. Steps to Get You Started

1.5. Can You Install Using the CD-ROM?

Installing from a CD-ROM requires that you have purchased a Red Hat Enterprise Linux 3 product,

or you have a Red Hat Enterprise Linux CD-ROM, and you have a CD-ROM drive. If your system

supports booting from the CD-ROM, it is an easy way to begin a local CD-ROM installation.

1.6. Preparing for a Network Installation

Note

Make sure an installation CD (or any other type of CD) is not your hosting partition’s drive if you are

performing a network-based installation. Having a CD in the drive may cause unexpected errors.

The Red Hat Enterprise Linux installation media must be available for either a network installation

(via NFS, FTP, or HTTP) or installation via local storage. Use the following steps if you are perform-

ing an NFS, FTP, or HTTP installation.
The NFS, FTP, or HTTP server to be used for installation over the network must be a seperate machine

which can provide the complete

RedHat/

directory. Both the

RedHat/base/

and

RedHat/RPMS/

directories must be available and populated with all files from all installation CD-ROMs.

Note

The directory specified in the following refers to

/location/of/disk/space/

. This means it is the

directory up to, but

not

including, the

RedHat/

distribution directory. For example, if you have Red Hat

Enterprise Linux 3 installation files located in

/export/redhat/

on the installation staging server,

/location/of/disk/space/

would be

/export/redhat/

To copy the

RedHat/

directory from the installation CD-ROMs to a Linux machine which acts as an

installation staging server, perform the following steps:

•

For each binary CD-ROM, execute the following commands:

•

mount /mnt/cdrom

•

cp -var /mnt/cdrom/RedHat /location/of/disk/space

where

/location/of/disk/space/

is a directory you create such as

/export/redhat/

•

umount /mnt/cdrom/

•

Note that the Release Notes are not included in the

RedHat

directory. Unless they are specifically

copied over, the Release Notes will not be available during your installation of Red Hat Enterprise

Linux. The Release Notes are formatted in HTML files located at the root of the disc. Copy the files

to your installation directory. For example:

cp /mnt/cdrom/RELEASE-NOTES*.html

/location/of/disk/space/

The Release Notes are also available online from http://www.redhat.com/docs/.

•

Next, make

/location/of/disk/space/

accessible to the installation program via NFS, FTP,

or HTTP and verify access from a client.

Содержание ENTERPRISE LINUX 3 - FOR IBM ESERVER ISERIES AND IBM ESERVER PSERIES

















































































Результаты поиска

Содержание ENTERPRISE LINUX 3 - FOR IBM ESERVER ISERIES AND IBM ESERVER PSERIES

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 3 - FOR IBM ESERVER ISERIES AND IBM ESERVER PSERIES

Бренды по названию

Популярные бренды

Red Hat ENTERPRISE LINUX 3 - FOR IBM ESERVER ISERIES AND IBM ESERVER PSERIES, Руководство по установке

Результаты поиска

Содержание ENTERPRISE LINUX 3 - FOR IBM ESERVER ISERIES AND IBM ESERVER PSERIES

Отзывы:

Похожие инструкции для ENTERPRISE LINUX 3 - FOR IBM ESERVER ISERIES AND IBM ESERVER PSERIES

Бренды по названию

Популярные бренды