Red Hat DIRECTORY SERVER 8.0 Скачать руководство пользователя страница 260

Страница: 260 / 552

Chapter 8. Managing Replication

242

NOTE

If attribute encryption is enabled, a secure connection

must

be used for the

encrypted attributes to be replicated.

Hit

Next

4. Fractional replication controls which entry attributes are replicated between servers. By default,

all attributes are replicated. To select attributes that will

not

be replicated to the consumer, check

the

Enable Fractional Replication

checkbox. Then, highlight the attribute (or attributes) in the

Included

column on the right, and click

Remove

. All attributes that will not be replicated are

listed in the

Excluded

column on the left, as well as in the summary the replication agreement is

complete.

Содержание DIRECTORY SERVER 8.0









































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DIRECTORY SERVER 8.0

Отзывы:

Red Hat DIRECTORY SERVER 8.0, Руководство администратора, Страница: 260 / 552

Результаты поиска

Содержание DIRECTORY SERVER 8.0

Отзывы: