Red Hat DIRECTORY SERVER 8.0 Скачать руководство пользователя

Страница: 23 / 552

Starting and Stopping Directory Server from the Command Line

1.3.2. Starting and Stopping Directory Server from the Command

Line

There are two ways to start, stop, or restart the Directory Server:

• There are scripts in the instance directories. For example:

/usr/lib/dirsrv/slapd-

instance

/start-slapd

/usr/lib/dirsrv/slapd-

instance

/restart-slapd

/usr/lib/dirsrv/slapd-

instance

/stop-slapd

• The Directory Server service can also be stopped and started using system tools on Red Hat

Enterprise Linux and Solaris. For example, Linux uses the

service

tool:

service dirsrv {start|stop|restart}

instance

NOTE

The service name for the Directory Server process on Red Hat Enterprise Linux is

dirsrv

Solaris uses

/etc/init.d

/etc/init.d/dirsrv {start|stop|restart}

instance

The Directory Server instance name can be specific in both the

start|stop|restart-slapd

and

system scripts. If an instance name is not given, the start or stop operation applies to all instances on
the machine.

1.3.3. Starting and Stopping Administration Server

There are two ways to start, stop, or restart the Administration Server:

• There are scripts in the

/usr/sbin

directory.

/usr/sbin/

start|stop|restart

-ds-admin

• The Administration Server service can also be stopped and started using system tools on Red Hat

Enterprise Linux and Solaris. For example, on Red Hat Enterprise Linux, the command is

service

service dirsrv-admin {start|stop|restart}

NOTE

The service name for the Administration Server process on Red Hat Enterprise Linux is

dirsrv-admin

On Solaris, the service is

init.d

Содержание DIRECTORY SERVER 8.0









































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DIRECTORY SERVER 8.0

Отзывы:

Похожие инструкции для DIRECTORY SERVER 8.0

Бренды по названию

Популярные бренды

Red Hat DIRECTORY SERVER 8.0, Руководство администратора

Результаты поиска

Содержание DIRECTORY SERVER 8.0

Отзывы:

Похожие инструкции для DIRECTORY SERVER 8.0

Бренды по названию

Популярные бренды