cn=config
45
Parameter
Description
Default Value
5
Syntax
Integer
Example
nsslapd-maxthreadsperconn: 5
2.3.1.80. nsslapd-nagle
When the value of this attribute is
off
, the
TCP_NODELAY
option is set so that LDAP responses (such
as entries or result messages) are sent back to a client immediately. When the attribute is turned
on, default TCP behavior applies; specifically, sending data is delayed so that additional data can be
grouped into one packet of the underlying network MTU size, typically 1500 bytes for Ethernet.
Parameter
Description
Entry DN
cn=config
Valid Values
on | off
Default Value
off
Syntax
DirectoryString
Example
nsslapd-nagle: off
2.3.1.81. nsslapd-outbound-ldap-io-timeout
This attribute limits the I/O wait time for all outbound LDAP connections. The default is
300000
milliseconds (5 minutes). A value of
0
means that the server does not impose a limit on I/O wait time.
Parameter
Description
Entry DN
cn=config
Valid Range
0 to the maximum 32-bit integer value
(2147483647)
Default Value
300000
Syntax
DirectoryString
Example
nsslapd-outbound-ldap-io-timeout: 300000
2.3.1.82. nsslapd-plug-in
This read-only attribute lists the DNs of the plug-in entries for the syntax and matching rule plug-ins
loaded by the server.
2.3.1.83. nsslapd-port (Port Number)
This attribute gives the TCP/IP port number used for standard LDAP communications. To run SSL/TLS
over this port, use the Start TLS extended operation. This selected port must be unique on the host
system; make sure no other application is attempting to use the same port number. Specifying a port
number of less than
1024
means the Directory Server has to be started as
root
.
The server sets its
uid
to the
nsslapd-localuser
value after startup. When changing the port
number for a configuration directory, the corresponding server instance entry in the configuration
directory must be updated.
Содержание 8.1
