Red Hat 8.1, Справочник по командам

Страница: 117 / 372

cn=tasks
103
Attribute Description
backend, this value is
0
, and see the monitor
entry for each one for more information.
SlaveHits Not used. This value is always
0
.
CacheEntries
and
CacheHits
are updated every ten (10) seconds. Red Hat strongly encourages using the database
backend specific monitor entries for this and other database information.
Table 2.8. SNMP Statistic Attributes
2.3.15. cn=tasks
Some core Directory Server tasks can be initiated by editing a directory entry using LDAP tools. These
task entries are contained in
cn=tasks
. Each task can be invoked by updating an entry such as the
following:
dn: cn= task_id , cn= task_type , cn=tasks, cn=config
...
In Red Hat Directory Server deployments before Directory Server 8.0, many Directory Server
tasks were managed by the Administration Server. These tasks were moved to the core Directory
Server configuration in version 8.0 and are invoked and administered by Directory Server under the
cn=tasks
entry.
There are seven tasks that are managed under the
cn=tasks
entry:
•
cn=import
•
cn=export
•
cn=backup
•
cn=restore
•
cn=index
•
cn=schema reload task
•
cn=memberof task
The common attributes for these tasks are listed in
Section 2.3.15.1, “Task Invocation Attributes for
Entries under cn=tasks”
.
The
cn=tasks
entry itself has no attributes and serves as the parent and container entry for the
individual task entries.
IMPORTANT
Task entries are not permanent configuration entries. They only exist in the configuration
file for as long as the task operation is running or until the
ttl
period expires. Then, the
entry is deleted automatically by the server.