Red Hat 8.1, Справочник по командам

Страница: 22 / 372

Chapter 2. Core Server Configuration Reference
8
These default ACIs allow all LDAP operations to be carried out on all configuration attributes by the
following users:
• Members of the Configuration Administrators group.
• The user acting as the administrator, the
admin
account that was configured at setup. By default,
this is the same user account which is logged into the Console.
• Members of local Directory Administrators group.
• The SIE (Server Instance Entry) group, usually assigned using the
Set Access Permissions
process the main console.
For more information on access control, see the
Directory Server Administrator's Guide
.
2.2.2. Changing Configuration Attributes
Server attributes can be viewed and changed in one of three ways: through the Directory Server
Console, by performing
ldapsearch
and
ldapmodify
commands, or by manually editing the
dse.ldif
file.
NOTE
Before editing the
dse.ldif
file, the server
must
be stopped; otherwise, the changes
are lost. Editing the
dse.ldif
file is recommended only for changes to attributes which
cannot be altered dynamically. See
Section 2.2.2.3, “Configuration Changes Requiring
Server Restart”
for further information.
The following sections describe how to modify entries using LDAP (both by using Directory Server
Console and by using the command line), the restrictions that apply to modifying entries, the
restrictions that apply to modifying attributes, and the configuration changes requiring restart.
2.2.2.1. Modifying Configuration Entries Using LDAP
The configuration entries in the directory can be searched and modified using LDAP either via the
Directory Server Console or by performing
ldapsearch
and
ldapmodify
operations in the same
way as other directory entries. The advantage of using LDAP to modify entries is changes can be
made while the server is running.
For further information, see the "Creating Directory Entries" chapter in the
Directory Server
Administrator's Guide
. However, certain changes do require the server to be restarted before they are
taken into account. See
Section 2.2.2.3, “Configuration Changes Requiring Server Restart”
for further
information.
NOTE
As with any set of configuration files, care should be taken when changing or deleting
nodes in the
cn=config
subtree as this risks affecting Directory Server functionality.
The entire configuration, including attributes that always take default values, can be viewed by
performing an
ldapsearch
operation on the
cn=config
subtree: