Red Hat 8.1, Справочник по командам

Страница: 49 / 372

cn=config
35
Parameter Description
Valid Range -1 | 1 to the maximum 32 bit integer value
(2147483647) where a value of -1 means the log
file is unlimited in size.
Default Value 100
Syntax Integer
Example nsslapd-errorlog-maxlogsize: 100
2.3.1.57. nsslapd-errorlog-maxlogsperdir (Maximum Number of Error Log
Files)
This attribute sets the total number of error logs that can be contained in the directory where the error
log is stored. Each time the error log is rotated, a new log file is created. When the number of files
contained in the error log directory exceeds the value stored on this attribute, then the oldest version
of the log file is deleted. The default is
1
log. If this default is accepted, the server does not rotate the
log, and it grows indefinitely.
If the value for this attribute is higher than
1
, then check the
nsslapd-errorlog-
logrotationtime
attribute to establish whether log rotation is specified. If the
nsslapd-
errorlog-logrotationtime
attribute has a value of
-1
, then there is no log rotation. See
Section 2.3.1.54, “nsslapd-errorlog-logrotationtime (Error Log Rotation Time)”
for more information.
Parameter Description
Entry DN cn=config
Valid Range 1 to the maximum 32 bit integer value
(2147483647)
Default Value 1
Syntax Integer
Example nsslapd-errorlog-maxlogsperdir: 10
2.3.1.58. nsslapd-errorlog-mode (Error Log File Permission)
This attribute sets the access mode or file permissions with which error log files are to be created.
The valid values are any combination of
000
to
777
since they mirror numbered or absolute UNIX file
permissions. That is, the value must be a combination of a 3-digit number, the digits varying from
0
through
7
:
• 0 - None
• 1 - Execute only
• 2 - Write only
• 3 - Write and execute
• 4 - Read only
• 5 - Read and execute
• 6 - Read and write