COPYRIGHT © 2015 RED.COM, INC
REDCAST MODulE OPERATION GuIDE
955-0072, REV-H | 26
All RED
®
products are designed for rugged durability, but precision instruments demand proper care. Follow the
instructions in this chapter to clean, maintain, and store the REDCAST™ Module.
WARNING:
DO NOT rinse or immerse the REDCAST Module in water. Keep dry at all times.
WARNING:
DO NOT use soaps, detergents, ammonia, acetone, alkaline cleaners, abrasive cleaning compounds,
or solvents. These substances may damage lens coatings and electronic circuitry.
WARNING:
DO NOT attempt to modify, dismantle, or open your REDCAST Module as doing so may expose you
to electric shock and serious injury. There are no user-serviceable parts inside. Alteration or repairs made to
the REDCAST Module, except by a RED authorized service facility, voids all warranties.
CLEAN REDCAST MoDuLE EXTERIoR SuRFACES
Use a gas duster to clean around the recesses on the exterior of the REDCAST Module.
Clean with a damp, lint-free cloth. When cleaning your REDCAST Module, remember that the device is
not waterproof and moisture can damage electronic circuitry.
SToRE REDCAST MoDuLE
WARNING:
DO NOT store the REDCAST Module in any place with extreme temperatures, direct sunlight, high
humidity, severe vibration, or strong magnetic fields.
WATER DAMAGE
If your device has come in contact with water or you suspect water damage, contact your Bomb Squad
representative immediately.
WARNING:
DO NOT attempt to power any device that may have water damage.
WARNING:
DO NOT place the device in a container of rice, silica gel, or desiccant packets in an attempt to dry
the device.
05
REDCAST MODUlE
MAINTENANCE
