REDCAST MODulE OPERATION GuIDE
COPYRIGHT © 2015 RED.COM, INC
955-0072, REV-H | 17
SET UP GENLOCK WITH THE REDCAST MODULE
The REDCAST Module has a BNC SYNC port that supports incoming sync signals. This section describes
how to set up the camera to receive sync signals from an external genlock device via the REDCAST Module.
NOTE:
When a REDCAST Module is installed, you can still receive sync signals via the SYNC port on the
BRAIN. For more information, see the
1. Set up the REDCAST Module. For more information, go to
“Output Quad UHD or 1080p” on page 12
2. Connect the REDCAST Module to a genlock device:
A. Ensure that the genlock device is off.
B.
Use a 75 Ω coaxial cable to connect the
SYNC
port on the REDCAST Module to a compatible genlock
device.
C. Turn on the genlock device.
3. Go to
Menu
>
Settings
>
Display
>
REDCAST
.
4. Select
On
from the
Genlock
drop-down menu.
