COPYRIGHT © 2015 RED.COM, INC
REDCAST MODulE OPERATION GuIDE
955-0072, REV-H | 22
You can output a 3D lookup table (LUT) via each SDI-OUT connector on the REDCAST™ Module.
NOTE
: Using a 3D LUT requires that your DSMC
®
is on firmware v6.0 or later.
COMPATIBLE 3D LUT FORMATS
The REDCAST Module is compatible with the following 3D LUTs:
DaVinci Resolve
®
3D Cube LUT (.cube)
IRIDAS/Adobe
®
3D Cube LUT (.cube)
Nucoda CMS 3D LUT (.cms)
The REDCAST Module is compatible with the following 3D LUT formats:
17x17x17
26x26x26
32x32x32
33x33x33
MANAGE 3D LUTS
To manage 3D LUTs, go to
Menu
>
Settings
>
Display
>
Monitor Control
.
3D LUTs can be stored on the camera or transferred to SSD, so that you can build a library of 3D LUTs, or
quickly copy 3D LUTs from one camera to another via SSD.
In Camera
: 3D LUTs that are saved internally on the camera.
On Media \luts
: 3D LUTs that are on the SSD.
04
LOAD AND
USE 3D LUTS
