Original Instruction Manual |
WG250
Wet Stone Sharpening System | Version 3.0 | November 2012
20
A
B
C
D
E
F
G
J
C
M
K
L
N
A
O
P
Q
R
S
T
I
H
Attention:
Make all adjustments or maintenance
with the machine unplugged from the power source.
Note:
The stone diameter needs to be set on the
scale (X) to get correct angle reading.
9. Set up and Adjustment - Cont.
Sharpening Jig Setup
1. Use the angle finder (T) to establish the tools existing
cutting edge.
2. Clamp the tool in the appropriate jig.
3. Adjust the support arm (G) and change the tool clamping
position to get to the correct grinding angle.
4. Use the angle setting gauge (S) to inspect the angle in
relation to the Sharpening Stone.
Torque Adjustment
• During heavy machining the friction drive may slip.
• Therefore a torque adjustment has been installed on
the machine.
• Turn the torque adjusting knob (D) clockwise to add more
pressure to the friction drive.
• When no added torque is required or when the machine
is not in use, release the pressure to avoid permanent
deformation of the friction drive rubber (O).
T
S
X
G
T
S
X
G
i
Kg
Содержание WG250
Страница 37: ...37 14 Parts Lists Diagrams ...