Record Power WG250, Оригинальное руководство пользователя

Страница: 23 / 40

23
Getting to Know the Long Knife Jig
The adjustable clamp allows the jig to hold knives of
any thickness.
The long knife jig is wider than the Short Knife Jig so
offers more support. The mounting and operation are the
same as the Short Knife Jig above.
A
B
C D
45mm
A
B
C D
100mm
E
E
Use to sharpen:
• Knives over 4” in length
• Large knives
• Large cutlery knives
• Draw knives
10.2.
WG250/H
Long Knife Jig
A. Adjustable Clamp
B. Adjustable Stop
C. Screw to adjust clamp to thickness of blade
D. Knob to lock the knife in place
E. Fine adjustment knob
Using the Long Knife Jig
1. Loosen the large knob (D) on the centre of the clamp.
2. Place the knife in the clamp.
3. Use the screw (C) to adjust the clamp to the thickness of
the knife.
4. Tighten the large knob (D) on the centre of the clamp to
lock the knife in place.
5. The correct knife position when held in the clamp will
keep the bevel and the edge angle consistent along the
length of the blade.
A
B
C D
45mm
A
B
C D
100mm
E
6. Rest the Adjustable Stop (B) of your jig on the
Sharpener’s
Support Arm.
7. The edge angle can be adjusted by turning the screw (E)
on the side of the Adjustable Stop (B).
8. An inclusive angle of 25-30º range gives a uniform grind
across the blade.
9. Ensure slow consistent movements over the grind stone.
10. Turn the jig holding the knife over to repeat process.
A
B
C D
45mm
A
B
C D
100mm
E