27
10.6.
WG250/D
Plane Camber Jig
Getting to Know the Plane Camber Jig
The plane camber jig slides on the support arm of your wet
stone sharpener.
A.
Lock nut
B.
Fence
C.
Lock knob
D.
Rocker pads
C
D
A
B
Using the Plane Camber Jig
1. Mount the support arm in upper position.
2. Centre your plane in the middle of your jig. Use the fence
to gain a straight edge. Lock the blade in place using the
lock knobs.
3. At either end of the jig there are two rocker pads. These
pads are used to apply pressure to the blade to achieve
a camber. The amount of pressure can be changed by
adjusting the lock nuts on the reverse of the rocker pads.
4. When grinding you can apply pressure, from left to right
in the direction you move the jig along the support arm.
5. To finish hone your plane blade on the leather honing
wheel, see page 11.
C
D
A
B
Use to sharpen:
• Camber planer blades up to 3” wide
Note:
A plane blade is best sharpened to a convex shape
which allows you to make a cut without leaving edge
marks or lines. The best way to achieve this is to add
camber to your blade.
Содержание WG250
Страница 37: ...37 14 Parts Lists Diagrams ...
