-
If you have any doubts on correctness of your procedure, contact a responsible person.
-
Do not neglect performance of regular inspections in accordance with the instructions for use.
-
Check and make sure that no disturbances occur on the machine caused by the user.
-
After the work is finished, adjust the machine so that it is ready for another series of
operations.
-
Should a failure in power supply occur, switch off the machine immediately.
-
Do not paint, make dirty, cause any damage to, alter or remove safety plates. If they become
illegible or lost, contact the manufacturing plant and renew the plates.
-
Keep work area clear. Cluttered areas and benches cause injuries.
-
Consider work area’
s environment. Do not expose tools to rain. Do not use tools in damp or
wet location. Keep work area well lighted .Do not use tools in the presence of flammable liquids
or gases.
Clothes and personal safety
-
Experience shows that injuries are caused by various personal articles, e.g. rings, watches,
bracelets, necktie etc. Therefore take them off before starting the work, button the sleeves,
take off a tie, which may be caught with various parts of the working machine. Wear hair
protection and fasten hair properly to avoid catching by moving part. Wear suitable tight cloth,
shoes recommended or prescribed by labour-safety regulations of all countries.
-
Wear safety outfit (goggles, apron, safety shoes, hearing protection etc.).
-
In the case of any obstacles above your head
–
in the working area - wear a helmet.
-
Always wear a protective mask while machining any material that produces dust while being
machined.
-
Never wear any loose working clothes.
-
Do not work on the machine under influence of drugs or alcohol, and when you are tired.
Safety regulations for operators
Do not put the machine into operation before you get acquainted with the contents of the
instructions for use.
-
Make sure that electric cables are not damaged so that injuries caused by electric current
leaking (electric shocks) are avoided.
-
Check regularly that safety covers are mounted properly and that they are not damaged.
Repair damaged covers immediately or replace with other ones by a qualified person.
-
Do not put the machine into operation with the cover removed.
-
Never use any tools that are distorted, broken or blunt.
-
Always use the tool suitable for the work given, which corresponds to the machine
specifications. The tools, cutter blocks, must be in accordance with EN 847-1.
-
Replace blunt tools as soon as possible
,
as blunt tools may cause injuries or damage.
-
Never use the tools at speeds higher than their recommended rated speeds by the respective
manufacturer.
-
Stop all functions of the machines before replacing tools and pull out the plug from the supply
Содержание PT260
