8
Unpacking and Cleaning
1. Carefully lift the lathe from the carton and check that all of the components and contents have been
included. Place parts on a protected surface.
2. Clean all rust protected surfaces with white spirit. Do not use gasoline, paint thinner, mineral spirits,
etc. These may damage painted surfaces. Make sure the area is well ventilated and that there are no
naked flames or sources of ignition.
3. Set packing materials and shipping carton aside. Do not discard until the machine has been set up
and is running properly.
Tools Required for Assembly
(Not Supplied)
Phillips screwdriver
5. Specifications
6. Contents of the Package
Voltage:
230 V
Frequency:
50 Hz
Motor input P1:
0.75 kW
Motor output P2:
0.55 kW
Motor speed:
2900 rpm
Full load current:
3 A
Max. bowl diameter:
320 mm (12
½
”)
Max. between centres:
510 mm (20”)
Max. swing over bed:
320 mm (12”)
Spindle speeds:
250 - 3850 rpm
Taper:
2 Morse Taper
Spindle travel:
63 mm
Size:
L1035 x W305 x D449 mm
Weight:
52 kg
Spindle Thread:
M33 x 3.5
Sound Pressure Level:
No load < 80dB(A), Load < 90dB(A)
Sound Power Level:
No load < 90dB(A), Load < 100dB(A)
1
2
3
4
13
10
11
12
9
5
6
7
8
1
Lathe with faceplate, tool rest holder and tailstock installed
1
2
Tool rest
1
3
Spindle wrench
1
4
Faceplate wrench
1
5
M6 x 12 mm Phillips head screws and washers
2
6
Drive centre knockout bar
1
7
Revolving centre
1
8
4 prong drive centre
1
9
Tool holder
1
10
3 mm hex wrench
1
11
4 mm hex wrench
1
12
5 mm hex wrench
1
13
Knockout bar
1
Item Description
Quantity
Item Description
Quantity
