Page 65
MOD Live User Manual
|
Version 1.1
|
© 2012 Recon Instruments Inc
|
All rights reserved
|
www.reconinstruments.com
To charge using a PC or Mac:
1.
Make sure your computer is turned on,
and not in stand-by mode.
2.
Make sure MOD Live is turned off. If the
unit is on, hold down the power button for
2 seconds.
3. Connect the USB cable shipped with MOD
Live. Plug the micro USB cable’s smaller
end into the micro USB port located under
the protective cover on the right side of
the goggles. Plug the USB cable’s larger
end into the USB port in your PC or Mac.
4.
Check that a red light above the USB port
appears. This shows that MOD Live is
charging.
5.
Tip: If your computer does not recognize
MOD Live, try reinserting the USB cable.
6.
The red USB port light turns off when MOD
Live is charged.
To charge using a power outlet:
1. Connect the USB cable shipped with MOD
Live. Plug the micro USB cable’s smaller
end into the micro USB port located under
the protective cover on the right side of
the goggles
2. Plug the USB cable’s larger end into either
the North American or European AC
adapter shipped with your unit.
3. Plug the AC adapter into a wall outlet.
4.
Check that a red light above the USB port
appears. This shows that MOD Live is
charging.
Keep charging until the red USB port light
turns off (which indicates MOD Live is fully
charged).
Battery
