Page 5
MOD Live User Manual
|
Version 1.1
|
© 2012 Recon Instruments Inc
|
All rights reserved
|
www.reconinstruments.com
Snap MOD Live into goggles
1. Remove the lens from the goggle frame.
See instructions provided by the goggle
manufacturer.
2.
On the frame of your goggles, remove the
protective badge from the left side of the
frame. This will reveal slots for MOD Live
to be inserted.
3.
Next, insert MOD Live into the goggle
frame as follows: with the goggles facing
you, snap the MOD Live micro optics
display unit into the left inner corner of
the frame. Next, insert the battery pack
into the right corner.
4. Push the MOD Live cable into the groove
so that it fits tightly.
5.
If the cable is too short, tug it gently so
the white stripes appear. If the cable is
too long, push it back in.
6.
Insert the lens back into the goggles. Take
care not to touch or smudge the lens.
Only use goggles that are Recon-Ready®. 2011 Recon Ready™ partners include:
Uvex®, Briko®, Zeal®, and Alpina®.
Learn more about Recon-Ready goggles at http://www.ReconReady.com