HandPunch 2000 Installation and Operations Manual
11
SET ADDRESS
* NO YES #
# to change address
RDR ADD IS 1
# to leave 1 as default)
NEW?:
enter new address #
SET ADDRESS
# to change
* NO YES #
5 to exit
* next menu
SET ID LENGTH
* NO YES #
# to change
LENGTH IS 11
NEW?:
enter new ID length #
SET ID LENGTH
# to change
* NO YES #
5 to exit
* to next menu
SET SERIAL
* leave at default 9600 bps
* NO YES #
# to change
Set RS-232?
* NO YES #
# to set
9600 baud
# to leave default
* NO YES #
* to choose
# to select choice
SET SERIAL
# to change
* NO YES #
* to top menu
5 to exit
You may now complete the set up in the host computer or enroll employees. The next
group of menus is for employee enrollment.
Set address
The default address (1) is used
for most applications.
However, if it is necessary to
change it, you can set the
address from 2 to 255.
The ID length is typically be set
at the host computer. When
setting the ID length, change to
the number of digits in the
longest ID number to be entered
in the keypad.
Set serial
9600 bps is the correct setting
for most applications. The baud
rates can be set from 300bps
minimum to 28,800 bps
maximum.
