Rebel TOOLS MIE-RB-55, Руководство пользователя

Страница: 13 / 34

4. If the resistance measurement will be conducted on the
circuit, disconnect the circuit from power and discharge all
capacitors.
5. Connect the test leads to the measured circuit.
6. The result will appear on the display.
Diode measurement
1. Connect the red test lead to the VΩ terminal.
2. Connect the black test lead to the COM terminal.
3. Set the rotary switch to position.
4. Connect the red lead to anode of the diode, and black to
the cathode.
5. Voltage drop will be displayed. If the display shows the "1",
it means that the polarization is reversed.
Continuity test
1. Connect the red test lead to the VΩmA terminal.
2. Connect the black test lead to the COM terminal.
3. Set the rotary switch to the position.
4. Connect the test leads to a measured circuit. If the
resistance is lower than 30 Ω+20 Ω, the buzzer will buzz.
hFE transistor test
1. Set the rotary switch to the hFE position.
2. Determine the type of transistor (PNP or NPN) and connect
the emitter, base and collector to proper sockets.
3. Approximate value of hFE will be displayed.
Capacitance measurement
1. Connect the red test lead to the VΩmA terminal.
2. Connect the black test lead to the COM terminal.
3. Connect the test leads to measured capacitor.
Caution: before measurement, disconnect the measured
circuit and discharge all of the capacitors.
EN
13