Real Carriage Door & Sliding Hardware Franklin Autoswing, Руководство по установке

Страница: 26 / 40

Page 26 Wireless Buttons
Real Carriage Door & Sliding Hardware Copyright 2020© all rights reserved
Wireless Wall Button
Note: Please see manufacturer instructions for
assembly
1. Press [“OK”] button four times to get into the
menu system
• Scroll with minus button [-] down to “rAdio”
• Press [“OK”]
2. The display will read “Add StArt”
• Press [“OK”]
• The display will read “hIddEn bUtton”
3. Note: The hidden button is the top two buttons
on the wall button.
• Press top left button (channel one) and top right
button (channel two)
4. Press and hold the hidden button on the wall
button until the display reads “rELEASE”
5. Let go of both buttons and press the “DESIRED
BUTTON” one time.
6. Programming is now complete
Outdoor Wireless
Keypad
• Each step has a 20 second timeout period, if
you do go past the timeout allotment then you
will need to start back at the beginning
• You cannot use passcodes with all the same
numbers, for example [1] [1] [1] [1]
• During use if an incorrect passcode has been
entered in after 3 consecutive tries the keypad
will stop for 90 seconds before you can
continue
• The outdoor keypad can work with up to
10 openings and therefor has 10 channels
available
Programming the Keypad to the Thalia Board
Each opener needs its own channel to operate.
Opening 1 is Channel 1 and Opening 2 is Channel 2
and so on. The default code per each channel is the
channel number. For example, Channel 1 is [1] [1] [1]
[1] and Channel 5 is [5] [5] [5] [5].
1. Press and hold the [ON] button
on the keypad until
the red LED light
comes on
• Press [1] [1] [1] [1]
• Press [ON]
• Red LED light will
blink
2. On your control unit’s control board press [OK]
four times
• Press [-] until the display reads “rAdio”