28
A
DDRESS
2 S
YSTEM
-Z
ONE
M
ENU
2.4
S
YSTEM
/Z
ONE
P
ROGRAM
S
CREENSHOT
Table of movements
Button
Screenshot
0
MAIN
2.3
SYSTEM/ZONE READOUTS
2.4.1 PROGRAMMING
2
SYSTEM/ZONE MENU
[SYST-ZONE PROGRAM]
Programming the
Timeslots
Menu 2.4 “Programming” allows weekly setting the required temperature, humidity, ventilation and air renewal for every hour
of the day.
NB: The “Ventilation” and “Air Renewal” functions (where provided) allow respectively for dehumidifier operation in "ventilation
only" mode and forced indoor air renewal with outdoor air.
The user must first set the programs (STD: standard, WD: weekday, WE: weekend, Pg1...Pg5: generic programs) to decide the
desired temperature or humidity (ventilation/air renewal) around the clock.
For example, to manage the temperature, you can set the STD program as follows:
22°C from 06:00 to 12:00,
20°C from 13:00:00 to 18:00:00,
21°C from 18:00:00 to 22:30:00.
and to manage humidity, you can set program Pg1 as follows:
40% humidity from 08:00 to 12:00 (only in “SUMMER” mode),
30% humidity from 13:00 to 22:30 (only in “SUMMER” mode). and so on for all the available programs.
The temperature or humidity set by the user in the various timeslots are identified with the “COMFORT” status; on the other
hand, whenever there is no temperature or humidity associated to the timeslot (in the example between 12:00 and 13:00 and
between 22:30 and 6:00), the temperature or humidity will be identified with the “ECONOMY” status, also settable as you wish.
Upon setting the various programs, the user must decide the ones to assign to every day of the week.
For example:
from Monday to Friday you can apply the “STD” program for the temperature and "Pg1" for the humidity; Saturday “WD” for the
temperature and "Pg1" for humidity; Sunday “WE” for humidity and "STD" for ventilation, etc.
The programming menu dedicated to the zones that belong to the selected system allows the user to activate some functions
in the desired timeslots.
In screenshot “2.4.1 Programming” you can select only the system to be programmed; the possible functions shall be analysed
in detail at a later stage.
A
DDRESS
2 S
YSTEM
-Z
ONE
M
ENU
/ 2.4 S
YSTEM
-Z
ONE
P
ROGRAM
/
2.4.1
P
ROGRAMMING
S
CREENSHOT
PROGRAMMING
SYSTEM
─────SYS[1]──────
N°:08 Zones
──────────────────────
Set programs
for selected system
Table of movements
Button
Screenshot
2
SYSTEM/ZONE MENU
2.4.1.1 TEMPERATURE
A
DDRESS
2 S
YSTEM
-Z
ONE
M
ENU
/ 2.3 S
YSTEM
-Z
ONE
R
EADOUTS
/ 2.3.1 R
EADOUTS
/ 2.3.1.4 U
X
BUS_
XX
2.3.1.4.1.6
U
X
BUS_
XX
G
ENERAL
I
NFO
R
EADINGS
S
CREENSHOT
Table of movements
Button
Screenshot
2.3.1.4 UxBUS_xx
Table of variables
No. Description
1
Modbus net index.
2
Model
3
Software version installed
4
Software revision installed
4
3
2
1
UxBUS_01 UC11
Reading info
ID UxBUS:09 - Modbus
Model:-
Rel:xxx
Rev:0000
Содержание WI-SA
