ATHENE 100
– SPREADER RATE CONTROLLER
2
Contents
1
Overview_________________________________________4
This Manual ................................................................................................... 4
Application..................................................................................................... 4
The Head Unit................................................................................................ 4
Calibration(Rate Controller) ........................................................................... 5
2
Switch functions in Normal Operating Mode ________6
2.1
Work Status Indicator .................................................................................... 7
2.2
Set Units ........................................................................................................ 7
2.3
Channel Selection ......................................................................................... 7
3
Forward Speed Display ___________________________8
3.1
Low Speed Alarm .......................................................................................... 8
3.2
High Speed Alarm (Under-application) ......................................................... 8
4
Area Display _____________________________________9
4.1
Select Area Total ........................................................................................... 9
4.2
Reset Area Total ............................................................................................ 9
5
Work Rate Display _______________________________10
6
Application Rate_________________________________11
6.1
Rate Control ................................................................................................ 11
6.2
Under-application (excessive speed) .......................................................... 11
6.3
Setting the Target Rate................................................................................ 11
6.4
Nudging the Target Rate ............................................................................. 12
6.5
Work Monitoring (without Rate Control) ...................................................... 12
7
Product Calibration ______________________________13
7.1
Static Calibration ......................................................................................... 13
7.2
Dynamic Calibration .................................................................................... 14
7.3
FAQ’s about Calibration .............................................................................. 15
There is a small discrepancy in the amount applied. ................................... 15
There is a big discrepancy in the amount applied. ...................................... 15
The instrument beeps continuously during the calibration test .................... 15
