12
(Fig. 23)
(Fig. 25)
(Fig. 24)
(Fig. 21)
(Fig. 20)
(Fig. 22)
8.
Cut the top beam (C) and cover (E) on
the angle indicated at the marks made in
Step 7. (Fig. 20)
Separate the pieces and cut the beam
1/2” shorter at the same angle. (Fig. 21)
9.
Insert a baluster in each rout of the bot-
tom beam cover (E) (Fig. 22).
Set the top beam cover (E) in place by
inserting the first baluster (at the upper
post) in the corresponding routs of the
top beam cover (E) and work towards
the bottom. Slide the top beam cover
(E) down several inches to allow for top
beam (C) installation. (Fig. 23)
10.
Insert the mounting brackets (H) into
both ends of the top beam (C) (Fig. 24).
The top bracket will be angled down and
the bottom bracket will be angled up.
Place the top beam (C) onto the balus-
ters. Slide the beam cover (E) up to the
bottom beam to adjust the top beam (C)
to the correct angle and secure in place
using screws (J). (Fig. 25)
Secure the brackets to the beam using
screws (K).
