8
1.
Pair / Unpair Camera
：
You can connect up to 4 cameras to your system.
2.
VOX:
Set the VOX sensitivity to detect low or high sound levels.
3.
Date & Time & Timer:
Set up the system date & time & feed timer.
4.
Language:
Setting language for the monitor, six options: English, German, French, Italian,
Netherlands and Spanish
5.
Brightness:
You can adjust the brightness of each individual camera.
6.
Temperature:
You can set Celsius or Fahrenheit, and set temperature alert high and low limit.
7.
Camera & Alarm Volume:
You can adjust the camera and alarm volume.
8.
Default:
Reset the monitor back to its factory settings.
9.
Back:
Save the settings and return to previous page.
10.
Home:
Return to Live View.
Mobile Application
—
Setting up camera to connect to your home router for remote access
To ensure better connection, better turn off the monitor in setting up process.
You can remotely monitor your baby via 5
”
monitor and SmartBabyCam App at the same time.
Go to the Google Play or Apple App Store to install the " SmartBabyCam " App onto your mobile phone.
There are two methods to register your camera to your home router. Smartlink and AP WiFi setting, if one
of them failed, pls try to use another method.
AP mode WiFi setup (Android)
1.
Turn on camera, press and hold "reset" button until the camera flash 3 times, then short press the
reset button again, the camera night light will change to fast flash.
2.
After about 10 seconds, short push the reset button, the night light will change to slow flash.
