9
3.
Go to your phone settings\Wireless & Networks\WLAN, find the SSID(WiFi name) with the name
xxxxx111A and connect to the SSID (no need to input password)
4.
Turn on SmartBabyCam App, Click
“
ADD DEVICE
”
to add camera, scan the QR code at the bottom
of the camera, input default password: 000000 and confirm, you will see online and touch the UID,
it will remind you to change unsafe password
(The new password should contain at least 6 characters, one
uppercase letter, one lowercase letter, one digit and one special character (choose from: ~`@#$%^*()_-+=|{}[].?/).
Note: if the password is wrong,
there will be a pop up message to say “Wrong Password”, pls enter the
correct
one in the blank and confirm
you can input any name
5.
After changed password, press the icon
Edit Device, find
“
WiFi Setting
”
area, select the SSID
(WiFi name, again, you can only connect the camera to 2.4GHz wifi, can not connet to 5G WiFi) and
input it
’
s password(better press the icon
to display password so that you can see what you
are typing) , pls press
“
OK
”
button, the night light will change to solid on, once you see the night
flash 3 times and then off, means the setting up succeeded, pls turn off your app and turn on again,
then you will see online under the UID and you can now remote access your camera from cell
