11
2.
After about 10 seconds, short push the reset button, the night light will change to slow flash.
3.
Go to your phone settings\Wireless & Networks\WLAN, find the SSID(WiFi name) with the name
xxxxx111A and connect to the SSID
4.
Turn on SmartBabyCam App, press
“
+
”
to add device, scan the QR code at the bottom of the
camera, input default password: 000000 and confirm, you will see online and touch the UID, it will
remind you to change unsafe password.
(The new password should contain at least 6 characters, one
uppercase letter, one lowercase letter, one digit and one special character (choose from: ~`@#$%^*()_-+=|{}[].?/).
5.
After changed password, press the icon
Edit Device, find
“
WiFi Setting
”
area, Input your WiFi
name, you can only connect the camera to 2.4GHz wifi, can not connet to 5G WiFi) and input it
’
s
password(better touch the icon
to display password so that you can see what you are
typing) , press send, the night light will change to solid on, once you see the night flash 3 times and
then off, means the setting up succeeded, pls turn off your app and turn on again, then you can
remote access your camera from cell phone anywhere.
