RDC6585PC Control System manual
V1.0
SHENZHEN RUIDA TECHNOLOGY
35
At this point, the "blue selection block" stays on the first parameter to indicate that the
parameter is selected, press the number key and the backspace key to set and modify the parameter.
Press the arrow button to move the "select block" to select other parameters for modification. When
the parameters are modified, press the
<Enter>
key to save the parameters, press the
<Esc>
key to
cancel the parameters, the interface disappears and returns to the main interface.
8.4.3 User parameters
In the menu interface, select "User parameters" entry and press the
<Enter>
key ,it will show as
below:
At this point, the panel automatically reads the motherboard parameters and displays them,
while displaying the progress of the read parameters in the "Read Parameters" entry. When all the
parameters are read out, the user can press the "up/down" key to move the "blue selection block" to
select a parameter category such as "carving", "feeding" and so on. The right parameter area displays
Figure 8.4.3-1
Figure 8.4.2
