RD Instruments Cobra-Tac Скачать руководство пользователя страница 38

Страница: 38 / 62

Cobra-Tac User's Guide

page 32

RD Instruments

CAUTION.

To end a mission, back out (

CANCEL

) until at the main screen,

then turn the power off.

This ensures that the events are saved.

If the

Cobra-Tac power is turned off before returning to the main screen, the
marked events will not be saved.

CAUTION.

To switch modes (for example, from Waypoint Nav to Grid

Nav) once a navigation option has been started (i.e. the

START

button was

pushed), you must use the

CANCEL

button to back out until at the main

screen and than turn the power off. Turn power on and select the desired
navigation mode.

If the power is not cycled, the mode will not change.

5.6.4

Navigating to a Marked Location

Select

MARK NAV

from the

NAVIGATION

menu, and the following

screen is then displayed asking for the number of the location the operator
is navigating to.

NOTE.

The

SET UP

options must be entered before the

Mark NAV

mode

can be started (see “Set Up Option,” page 28).

NOTE.

You must have marked an event in a previous navigation function.

NOTE.

For a tutorial on how to use the

MARK NAV

mode, see ““Mark

Navigation Mode,” page 18.

SELECT

M A RK LO CA TIO N : XX

A CCEPT

CA N CEL

Figure 17.

Mark Location

The

MARK LOCATION

field reads 00 and is highlighted. Use the

SELECT

function to choose the marked location to navigating to (1 to 99)

and then use the

ACCEPT

function to load the location. The following

screen appears.

Содержание Cobra-Tac































































Результаты поиска

Содержание Cobra-Tac

Отзывы:

RD Instruments Cobra-Tac, Руководство пользователя, Страница: 38 / 62

Результаты поиска

Содержание Cobra-Tac

Отзывы: