EPSILON ES2,ES4
63
Appendix 10
Connecting sensors to the devices ES4 transport monitoring LOCARUS
702/702X
"LOCARUS 702", "LOCARUS 702X" - a GPS / GLONASS and GSM terminals, capable of
determining the coordinates of the vehicle, to obtain information from the sensors and pass it on
GSM networks. To connect the FLS port is RS485.
Can connect up to 6 sensors ES4.
Configuration LOCARUS 702/702X and firmware
To configure the program is used LOCARUS 702/702X «U_Config» («Config900») from the
device manufacturer.
To configure the device, you must do the following:
Connect the equipment into an available USB port on the PC is off when the supply voltage.
Enter the folder with the program «U_Config» and run the file «Config900.exe».
After reading from the device configuration data choose the tab «RS-485":
Set the protocol type («L»), network address and parametric inputs of connected sensors
(example for 3-sensor network addresses 1,2,3, non parametric inputs 2,3,4):
