Adjusting the handle hole and/or recess for the lock housing
NoKey Force – Installing and Operating
8
2 Adjusting the handle hole and/or recess for the lock housing
If the gauge does not go into the handle hole, or if there is not enough space for the cable, the
necessary adjustments will have to be made.
2.1
Loosen and remove the lock housing.
Save the screws for later re-installation.
2.2
File the hole so that the cabling has
space and the gauge fits without
tension. Then re-install the lock
housing.
Now continue by adapting the unit for a
left-hinged door (see next page) or on the
following page, depending on the model:
K01 and K03: page 10
KC03: page 16
KC02: page 23
Space for cabling
