manualshive.com logo in svg
  • Главная
  • /
  • RCm
  • /
  • KILO
  • /
  • Инструкция по эксплуатации и техническому обслуживанию

RCm KILO, Инструкция по эксплуатации и техническому обслуживанию

Поделиться
Скачать
RCm KILO Скачать руководство пользователя страница 41

41

Opening/Closing of the batteries holder case and disconnection of the batteries connector

Proceed as follows to open the case and disconnect the connector:

1.  Rotate the ignition key to “0” and extract it.
2.  Operate on the rear side of the machine to extract the left pin (A), then rotate it a half turn to lock it in the ex-

tracted position.

3.  Extract the right pin (B) and keep it in the extracted position.
4.  Use the handle (C) to completely extract the batteries holder case (D), then engage the pin (B) on the relative 

locking hole of the batteries case.

5.  Disconnect the connector (E) of the batteries.

Proceed as follows for connection and closure of the case:

1.  Reconnect the connector (E) of the batteries.
2.  Disengage the pin (B) and carefully put the batteries case in its seat, then engage the pin (B) to the batteries 

case.

3.  Unlock and engage the pin (A) to the batteries case.

D

A

B

D

C

E

Содержание KILO
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды