RCm KILO, Инструкция по эксплуатации и техническому обслуживанию

Страница: 39 / 47

39
Cleaning the suction fi lter
1. Remove the vacuum motor (see procedure in the specifi c paragraph).
2. Remove the suction fi lter (A) from the support (B).
3. Clean the suction fi lter with a brush and compressed air (max. 5 Bar). Replace the fi lter if worn.
!
ATTENTION!
Appropriately protect body parts (eyes, hair, hands, etc.) when cleaning with compressed air or water guns.
4. Assemble, following the disassembly operations in reverse.
Cleaning the detergent solution (or washing water) fi lter
1. With the machine's controls, lower the squeegee and the disc brush, then turn the ignition key to “0” and ex-
tract it (see Use chapter).
2. Operate on the right side of the machine to unscrew and remove the transparent cover with fi lter (D).
3. Remove the fi lter (E) from the transparent cover (F).
4. Clean the fi lter (E) and the transparent cover (F).
5. Replace the fi lter (E) in its transparent cover case (F).
6. Screw the transparent cover with fi lter (D) in its seat.
7. Rotate the ignition key to “I” and wait for the squeegee and the disc brush to lift, then rotate the ignition key to
“0” and extract it.
A
B
D
E
F
D