Product Accessories Guide Continued
Also Available
DSS Retrofit Kit
- Allows a DSS option to be added to a lock that was not originally equipped with DSS.
6
8310 & 8320 Electromagnetic Lock
Installation Instructions
(Continued)
Part
Usage
Example
Split Armature Plates
used for traffic control applications where two
doors are to be used with a single 8310 lock.
The Split Armature plates are half the length
of a standard armature. each of these is
mounted on one of a pair of doors with an 8310
lock centered on the frame between the doors.
NOTE:
use of split armature plates will reduce
holding force.
Filler Bars
used to provide extra mounting space in a
hollow metal or wood frame where the door
stop of the frame is not thick enough to allow a
lock to be installed.
Available in several different heights and widths.
Spacer Bars
For use when an obstruction in the door
prevents the installation of the armature plate at
a proper height. If the armature plate needs to
be lowered then a spacer bar can be used to
lower the lock from the frame.
Available in several different thicknesses.
armature Holder
For use with doors that do not permit the
armature plate to be mounted low enough
to meet the magnet surface. eg: Some
aluminum framed commercial glass doors.
The armature holder can be mounted to whatever
frame is available and the armature plate in
turn mounted to the holder.
Available in both flat (for DSS monitoring as
shown) and pocket styles.
