background image

6

Connecting AUXILIARY
components

You can connect a laserdisc player, second VCR or camcorder/
video recorder to the VIDEO connection.

Using a paired (red/white) stereo cable and a single (yellow)
video cable, connect your new audio system to the
complimentary component as shown to the right.

To play laserdiscs or videos, press the VCR2•LD and then play.

NOTES:

 When using this connection for a second VCR,

the recording option is not available.

 If your camcorder or video camera does not have an
RCA-type terminal for audio/video, you can purchase an
adapter from an RCA dealer or electronic parts store.

If the video connection is being used when you try to
hook up your video recorder or camcorder, connect the
component through any other available video output.

Connecting your system
to your TV

Using audio cables, connect the left and right “OUT” audio
jacks on the back of your TV to the TV audio jacks on the
back of your audio system. Then use a video cable to connect
the VIDEO OUTPUT jack on the  back of your TV to connect to
the MONITOR OUT jack on the back of your audio system.

Connecting for power

Plug the power cord into an AC power outlet that accepts the
polarized plug — one blade wider than the other.

NOTE: 

 The STAND BY indicator light will come on to let

you know the system is plugged in and ready to use. This
light will stay on as long as the stereo is plugged in so
you can use the remote control  to turn on and operate
the system.

Using headphones

To listen privately to your favorite CDs, tapes or radio station,
your system has been equipped with a PHONES jack on the
front panel.

Using a Mic

Recording the MIC input with all signals from the functions
such as CD, TUNER, VCR1, and VIDEO.

Setting up the system

         

Have a Blast –
Just Not in Your Ears

Make sure you turn down the
stereo before you put on the
h e a d p h o n e s .   I n c r e a s e   t h e
volume to the desired level
after headphones are in place.

TV

AUDIO

L /

MONO

RIGHT

VIDEO
INPUT

OUT

 VIDEO
    IN

 AUDIO IN
R

 

L

VCR 1

MONITOR
OUT

        TV

COMPLIMENTARY
COMPONENT

L

R

VIDEO

AUDIO

OUT

 VIDEO
    IN

 AUDIO IN
R

 

L

VCR 1

VCR 2/
LD

MONITOR
OUT

        TV

Содержание RP-9380

































Отзывы: