22
VCR OPERATION
MTS/SAP R
ECORDING
The monitor output listed in the table shows the audio output mode
in the Hi-Fi L + R mode.
M
ONITOR
O
UTPUT
W
HEN
R
ECEIVING
A
SAP
B
ROADCAST
When receiving a SAP broadcast, if the SAP position is set to
ON
,
change the audio output mode to select Monitor Output (MAIN or
SAP). (See “Mode Selection” on Page 17.)
When enjoying a TV program with MAIN sound, select
L
. (See
“Mode Selection” on Page 17.)
When enjoying a TV program with SAP sound, select
R
or
MONO
.
(See “Mode Selection” on Page 17.)
T
APE
D
UBBING
C
ONNECTION
I
NSTRUCTIONS
Your VCR can dub (copy) video material from another video device
(except the built-in DVD player). It can also output video and audio
signals for recording on other video or audio equipment. Audio/
video dubbing cannot be done separately.
1. Switch your VCR to the auxiliary input by repeatedly pressing
INPUT
, until
AV1 or AV2
appears on screen. AV1 and AV2 are
the INPUT jacks from the other video/audio equipment. (You
can also press
CHANNEL
¿
or
À
on the player, or
CH +
or
CH
–
on the remote control.)
2. Begin recording on the dubbing VCR and playing on the source
VCR simultaneously.
Notes:
• When using special playback functions (Still Picture, Video
Search, Frame Advance, or Variable Slow Motion) during
dubbing, a blue screen may appear. Set
BLUE SCREEN
on the
dubbing VCR (for recording) to
OFF
. (See “Mode Selection” on
Page 17.)
• To use the TV as a monitor while dubbing, press
TV/VCR
on the
dubbing VCR to select VCR.
• Use an RCA pin-type connection cable (not supplied, available
from RadioShack) to connect the source VCR to the dubbing
VCR.
• Refer to the manual of the other VCR when dubbing a tape.
• If the source VCR is in monaural mode, connect the audio cable
to AUDIO-L on the dubbing VCR.
S
IMPLE
R
ECORDING
T
IMER
The Simple Recording Timer enables you to set the recording stop
time.
Make sure the clock is set before setting the Simple Recording Timer.
Example:
Recording a TV program in the SP mode. The program is
on Channel 2, ending at 9:50 AM. The present time is 8:43 AM.
1. Turn on the TV and select the video channel. (See “Setting the
Output Channel” on Page 16.)
2. Insert a cassette. The power turns on automatically and the VCR
POWER LED lights.
3. Press
TV/VCR
to select VCR. The VCR LED lights.
4. Set SAP to
ON,
to record an available second language. (See
“Setting the Output Channel” on Page 16.)
5. Press the number buttons or
CH +
or
CH –
, to select the desired
channel. (EX.:
02
)
6. Press
SP.EP
to set the recording speed (SP or EP). (EX.:
SP
)
7. Press
REC
to begin recording. The REC LED lights.
8. Repeatedly press
REC
again to enter the Simple Recording
Timer mode. The TIMER LED lights and the recording stop time
appears. (EX.:
9:50 AM
)
Each time you press
REC
, the stop time increases by 10
minutes.
Note:
The recording stop time flashes for a few seconds before
the stop time is set.
9. When the stop time is reached, recording stops automatically
and the power turns off.
C
HANGING
THE
C
ONTENTS
OF
THE
S
IMPLE
R
ECORDING
T
IMER
1. Press
REC
. The stop time flashes on the TV screen.
2. Repeatedly press
REC
until the desired stop time appears.
C
ANCELING
THE
S
IMPLE
R
ECORDING
T
IMER
Press
VCR STOP
. The Simple Recording Timer is disabled.
Notes:
• The Simple Recording Timer overrides other recordings.
• Ordinary timer programs are not recorded when portions of the
simple recording timer and the ordinary timer recording
overlap.
Broadcast
Received
SAP
Mode
Monitor Output
Recording
L.
Speaker
R.
Speaker
Hi-Fi
L. CH
Hi-Fi
R. CH
Linear
Track
Stereo
OFF
L
R
L
R
L + R
ON
L
R
L
R
L + R
SAP
OFF
Main
Main
Main
Main
Main
ON
Main
SAP
Main
SAP
SAP
Stereo/SAP OFF
L
R
L
R
L + R
ON
L + R
SAP
L + R
SAP
SAP
31-5025.fm Page 22 Wednesday, January 15, 2003 5:05 PM
