RCA GUIDE PLUS+ Gold Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 64

background image

53

Reference

Troubleshooting

Troubles sometimes are caused by simple “faults” that you can correct without the help of a service technician. If you
experience any difficulty with your TV, check a few basic remedies before calling your service technician.

TV will not turn on

•

Check to make sure it is plugged in.

•

Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in something else.

•

Maybe batteries in remote control are “dead.”

•

Maybe remote control is not aimed at remote sensor.

•

The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by
selecting the

Front Panel Block

in the Parental Controls menu and choosing

Unblock

.

Controls don’t work

•

If using remote control, make sure remote is in TV mode by first pressing TV button.

•

The front panel MENU button may be disabled. Use the remote control to turn off blocking. Select

Front Panel Block

in the Parental Controls menu and choose

Unblock

.

•

Try unplugging set for two minutes and then plug it back in and turn it on again.

Problems with remote

•

Maybe something is between the remote and the remote sensor.

•

Maybe the remote is not aimed directly at the component (TV or VCR) you are trying to control.

•

Maybe remote is not in TV Mode. Press the TV button so remote will control TV.

•

Maybe batteries in remote are weak, dead or installed incorrectly. Try replacing batteries. (Note, if you remove the
batteries, you may have to reprogram the remote to control other components.)

•

Remove batteries and hold number 1 for at least 60 seconds to drain the microprocessor inside the remote. Release
number 1, replace the batteries, and (if necessary) reprogram the remote.

Guide comes on when I turn on TV

•

The Guide automatically comes up when you use the TV button on the remote to turn on the TV. You can turn off this
feature by pressing GUIDE on your remote control and then press MENU to select the Menu bar. Press the right arrow
to select

Setup

. Choose

Review

Options

and then select

OFF

.

Turns off while playing

•

Schedule off function may have been activated.

•

Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn on
again. If this happens frequently, the voltage in your house may be abnormally high or low.

•

Unplug. Wait five minutes. Plug in again.

TV turns on unexpectedly

•

Scheduled On or Watch from the Guide may have been activated.

Blank screen

•

Maybe the component connected to the input jacks is not turned on.

•

Try another channel.

•

Press RESET, in case the picture controls are set too low.

No sound, picture okay

•

Maybe sound is muted. Try pressing volume up button to restore sound.

•

Maybe speakers are turned off. Check the Audio Output and Speakers control panel in the Audio menu.

•

If using an S-VHS component, remember to also connect the component’s L and R AUDIO OUT jacks to the TV’s L and R
INPUT jacks.

Can’t select certain channel

•

Channel may be blocked or not approved in the Parental Controls menu.

•

If using a VCR, check to make sure the TV/VCR switch on the VCR is in the correct position.

«
...
53
54
55
56
57
...
»

Содержание GUIDE PLUS+ Gold

































































Отзывы:

Нет отзывов

Похожие инструкции для GUIDE PLUS+ Gold

Бренд: NEC Страницы: 83

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 6

Бренд: NEC Страницы: 4

Showcase Series HT1100

Бренд: NEC Страницы: 6

Бренд: NEC Страницы: 99

Бренд: NEC Страницы: 114

Бренд: NEC Страницы: 82

Showcase Series HT1100

Бренд: NEC Страницы: 8

Бренд: NEC Страницы: 6

Бренд: Hamilton/Buhl Страницы: 8

Бренд: VASTEX Страницы: 8

Бренд: Laarhoven Страницы: 2

Бренд: BenQ Страницы: 2

Бренд: Christie Страницы: 9

Бренд: Da-Lite Страницы: 8

PJL1035 - LCD Projector SXGA

Бренд: ViewSonic Страницы: 53

Бренд: JAROLIFT Страницы: 37

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды