17
Chapter 3: Playing Discs (DVDs)
Loading and Playing Discs
Turn on the TV and your DVD Player (press STANDBY/ON on the player or press the DVD button on
the remote control).
1. Press the OPEN•CLOSE button (the disc tray opens).
2. Place a disc gently into the first slot in the tray with the disc’s label facing up (double-sided
discs have content on both sides, so you can place either side up).
3. Press the SKIP button to rotate the disc tray. Continue placing discs into the tray as described
above. There are 5 discs in the disc tray.
4. Press the OPEN•CLOSE or PLAY button. The disc tray closes.
The DVD Player reads the disc’s table of contents, and then one of two things happens depending
on how the disc was programmed:
• The disc starts playing.
• The disc menu appears on screen. One of the options will start disc play. Highlight that option
and press OK.
When you stop playing a disc, the player remembers where you stopped. When you start playing
the disc again, the DVD Player picks up where you left off unless the disc is removed, the player
is unplugged, or if you pressed the STOP button twice.
Disc Exchange
The Exchange button on the front panel allows you to change up to 4 discs while the fifth disc plays.
1. With a disc playing, press EXCHANGE on the front of the player. The disc drawer opens with
four slots available.
2. Use the SKIP button to turn the platter to the other slots.
3. After you’ve loaded or changed discs, press EXCHANGE again to close the disc drawer.
C
an
't Cat
ch U
p
C
an
't Catch U
p
Can
't
C
at
ch
Up
(Widescreen
Ve
rs
io
n)
This is an example of a
two-sided disc — the title
is usually in the center
of the disc.
This is an example of a
one-sided disc.
Note:
Before you begin
playing discs, the
EXCHANGE button can
be used to open the disc
drawer to load discs.
IB/500L Body 6/7/02 11:12 AM Page 17
