RCA ATSC11, Руководство пользователя, Страница: 8 / 40

Chapter 1: Connections & Setup
6
Chapter 1: Connections & Setup
7
�
�
����
�������
�������
���
���������
���
�������
���������
������� Ω
�������
�����
�����
�
�
�����
� �������
��
��
�������
����������
������
����� ����
���� ����
��������������
��������������
������������������
�
�
�
�
�
���������������
�����
�
�
�������
�����
�����
�����
���������
�����������
���������
��������� Ω
��������
�������
����������
����������
�����
������������������������
���������������������
�������������������������������������
1
2
3
7
4
5
6
Connection 2: HDTV Tuner + Monitor with RGB jack
1. Connect your cable or satellite signal to your monitor (if it’s not already connected).
If you haven’t already connected the signal from your cable outlet or satellite receiver to your monitor’s antenna or cable input,
make the connection. If your setup includes a satellite receiver, use the best connection offered by your satellite receiver that your
TV or monitor can accommodate, in addition to the coaxial connection. Please see the manual that came with your satellite receiver
for more information.
2. Connect an off-air signal to the HDTV Tuner.
Use a coaxial cable (usually included with an off-air antenna) to connect an off-air antenna to the ANTENNA INPUT jack on the back
of your HDTV Tuner.
Note:
As of May 2003, very few cable companies transmit a digital signal that this HDTV Tuner can decode. Do not connect this HDTV Tuner to
a cable outlet without making sure your cable company transmits an 8VSB ATSC signal. Contact your cable company for more information.
3. Connect the DVI-RGB adapter (included) to one end of an RGB cable (not supplied).
4. Connect the DVI-RGB adapter (with the RGB cable attached) to the DVI-HDTV/RGB OUT jack on the back of the HDTV Tuner.
Connect the other end of the RGB cable to the RGB input on the back of your monitor.
5. Make the audio connection.
Connect a pair of RCA-type cables to the AUDIO jacks in the COMPONENT OUT section of the back of your HDTV Tuner. Connect the
other ends of the cables to the audio input jacks on the back of your TV, monitor (shown above) or audio receiver (not shown). Make
sure you match the Left (white) output with the Left input and the Right (red) output with the Right input.
See pages 8-9 for instructions on how to connect a digital audio receiver to your HDTV Tuner.
6. Set the DTV OUT SELECT switch on the HDTV Tuner to DVI-HDTV/RGB.
7. Set the RESOLUTION SELECT switch to the DTV resolution setting that looks the best on your monitor or TV.
Note:
See your monitor or TV user’s guide for information regarding its native video resolution.
Go to page 9
Note:
Your TV or monitor back panel may not look exactly like the one pictured above.