RCA ATSC11, Руководство пользователя, Страница: 11 / 40

Chapter 1: Connections & Setup
8
Chapter 1: Connections & Setup
9
�
�
����
�������
�������
���
���������
���
�������
���������
�������
Ω
�������
�����
�����
�
�
�����
� �������
��
��
�������
����������
������
����� ����
���� ����
��������������
��������������
������������������
���������
�������������
�����
���������
�������������
�����
������
����������������������
����������
Note:
Your digital audio receiver
back panel may not look exactly
like the one pictured here.
Making the Connection
Connect one end of either an optical digital audio cable or a coaxial digital audio cable (you do not have to connect both) to the
corresponding digital audio output jack on the HDTV Tuner, and to the corresponding digital audio input jack on a Dolby Digital or PCM-
only receiver or decoder.
Using Your Component
After you connect your HDTV Tuner to your digital audio receiver/decoder, you must select Digital Audio Output from the Sound setup
menu (press the remote control’s HD TUNER button, then the MENU button, then select Setup , Sound , and Digital Audio Output ). Use the
remote control’s arrow and OK buttons to select PCM or Dolby Digital in order for the receiver to recognize the digital audio connection.
Select Dolby Digital if you’ve connected the HDTV Tuner to a Dolby Digital-capable receiver/decoder. Select PCM if your digital audio
receiver is not Dolby Digital capable. For more information, see Sound Setup on page 27.
Place Batteries in the Remote Control
Follow these steps whenever you need to install or change the batteries in your HDTV tuner’s
remote control.
1. Remove the cover from the battery compartment by pushing it down and sliding it.
2. Insert batteries in the battery compartment, matching the + and – end of each battery.
3. Replace the cover.
Note:
When replacing old batteries, you may need to reprogram the remote control to operate other
devices. Avoid pressing any of the remote control buttons while you’re replacing old batteries. If you
press a remote control button while replacing batteries, you might need to reprogram the remote
control to operate other devices.
Plug in and Turn on the HDTV Tuner
Plug the end of the power cord into the wall outlet. Be sure to insert the plug completely.
To turn on the HDTV tuner, press the HD TUNER button on the remote control or the POWER button on the front panel. If your TV brand
is RCA, GE, or Proscan, you can usually press the TV button on the remote control to turn on the TV. If your TV brand is not RCA, GE,
or Proscan, see page 13 in the next section,
Using the Remote Control
, for details on programming the HDTV Tuner’s remote control to
operate your TV.
Continues on next page...