RCA ATSC11, Руководство пользователя, Страница: 29 / 40

Chapter 4: Using the Menu System
26
Chapter 4: Using the Menu System
27
Source Signal
16:9 MONITOR FORMAT
PILLAR BOX FULL ZOOM
3
4
Not available
(DEFAULT for 4:3 signals)
(DEFAULT for 16:9 signals)
9
16
If you have a 16:9 monitor:
Pillar Box For 4:3 broadcasts, this setting places the image in the
middle of the screen with empty panels on either side. For 16:9
broadcasts, this setting shrinks the image and stretches it vertically
so that it fits into the “pillar box.” This is the default setting for 4:3
broadcasts.
Full For 4:3 broadcasts, this setting stretches the image horizontally
so that it fits on a 16:9 screen in its entirety and fills the entire
16:9 screen. The vertical scale of the image remains the same. For
16:9 broadcasts, this setting displays the image in its original format
and aspect ratio. This is the default setting for 16:9 broadcasts.
Zoom
The 4:3 image is magnified so that it fills the screen
horizontally. The top and bottom of the image are cropped (or cut). This
setting is not available for 16:9 broadcasts.
Notes:
You can also use the FORMAT button on your remote control to
switch between the available screen formats.
Some screen formats may not be available depending on the broadcast
signal and the screen ratio you’ve selected.
Certain screen format options may not be available depending on how
you’ve set the Resolution Select switch on the back of the tuner, as well as
on how the current program is being broadcast.
Time Setup
The Time Setup procedure is described in detail in Chapter 1. Go to page 11 for more information.
Sound Setup
Digital Audio Language Displays a choice list to set a default option for multitrack audio
from digital broadcasts. Use the up and down arrow buttons to choose the language you
want to hear (if available), and press OK. The audio languages available vary depending on
the program.
Note: You can also use the MTS button on your remote control to switch between the available
audio tracks.
Digital Audio Output
Displays a choice list of the available output options for digital audio.
Use the up and down arrow buttons to choose the digital audio format that best suits your
digital audio receiver –
Dolby Digital
or
PCM
.
Sound Logic Sound Logic helps reduce the difference in volume between channels, so that
you don’t get any sudden increases going from a relatively quiet channel to a loud one. In
the
Sound Logic menu, use the up and down arrow buttons on the remote to choose On or
Off .