•
Overheat protection: Output power will reduce to half power when temperature
reaches 100º C (212º F) and return to full power when temperature is under 100º
C
•
Safety Protection: ESC will not power motor unless the throttle stick is in the
minimum throttle position
•
ESC can be programmed via the transmitter on startup or using a programming
card (Sold separately)
•
ESC beeps motor during startup to confirm number of battery cells for power
input.
•
RC Electric Parts has intellectual property on the product and can be updated
and upgraded. The product can also be made to
customers’ specifications.
Model
Continuous
Current
Burst
Current
(10 sec)
BEC
BEC
Type
LiPo
Cells
Ni-MH
Cells
SIZE (mm)
Weight
30A ESC
30A
40A
5V / 3A
UBEC
2 - 4S
5 - 12S
53 x 25 x 11
33g
40A ESC
40A
60A
5V / 3A
UBEC
2 - 4S
5 - 12S
66 x 27 x 13
44g
60A ESC
60A
80A
5.5V /
4A
UBEC
2 - 4S
5 - 12S
68 x 36 x 20
68g
*Size and weight are for reference only and may slightly vary
BEC:
Means there is a regulator that steps down the input battery voltage to power the receiver and
everything that plugs into the receiver. SBEC & UBEC are a type of BEC.
UBEC:
Switching power regulator, very efficient, and produces minimal heat.
SBEC:
Linear power regulator, most common in ESCs, not as efficient, and produces a lot of heat
OPTO:
No BEC is provided and a separate BEC is required to power the receiver
02 Product Specifications
