commence protection. However, the ECS will reduce the output power gradually instead of
cutting off output power immediately so that the players will have certain period to rescue the
machine. It has both safety and practicability
Low Voltage Protection
● The warning tone: The warning tone is set as audible sound to help users judge abnormal
condition after turn on the power. 1. Fail to enter working mode after turn on the power: the
routine of throttle has not been set yet. 2. Continuing beeps: the pull rod of throttle is not in the
lowest position. 3. There is a short pause after a beep: the ESC can not detect normal throttle
signals from receiver. 4. There is a pause of one second after a beep: the voltage of battery pack
is out of acceptable limit (once the battery is connected, the ESC will carry out a self-checking
and check the voltage of battery.)
Please pay attention to the following safety information when using. ● Never disassemble any
electro components in the ESC by yourself, or permanent damages or lost of information will
occur. ● Check the setting of receiver. Do not install propeller or small driving gear on motor if
you haven't confirm that the setting of receiver is correct when test the ESC and motor for the
first time. ● Do not use cracked or broken battery pack. ● Do not use battery pack easily get
overheat. ● Do not use short-cut battery. ● Do not use cable insulation material against
standards. ● Do not use cable connector against standards. ● The number of battery or servo
system shall not exceed the rules for ESC. ● The voltage of battery shall not exceed the scope of
working voltage of ESC. ● Pay attention to the polarities of battery. Wrong polarities will
damage the ESC. ● Be sure that the ESC will not use in manned craft or other manned machines.
● Do not place the ESC in moist or over exposure. ● Do not take out battery when the motor is
working, for the generated large peak current will damage the ESC. ● Do not pack anything
outside the ESC. Install the ESC in places with good ventilation and heat dissipation as far as
possible.
08 Attention
