RBI HEATNET 3.0 Torus Series Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 136

background image

OPTIONAL FEATURES

HeatNet Control V3

Page 72

HeatNet Online

HeatNet Online is a web-based system for fault notification,
monitoring and tuning of a HeatNet based system. A HeatNet
Online bridge module is required to connect a boiler (Usually
the Master boiler) to the internet. The bridge is available for
version 2.x and version 3.x HeatNet controls and is standard
on V3.x. The bridge module provides an RJ45 connector for
access to the internet. If an RJ45 hardline is not available, a
wireless modem can also be used. Consult the factory or sales
for available solutions. The HeatNet Online site may be
accessed at:

www.heatnet.net/

.

A login Account/Password is required.

Once a user has registered a site, the user’s email can be set
up to provide daily status messages and fault/alarm emails
within minutes of trouble. This provides a valuable tool for
technicians on the road. If the technician has a smart phone,
they can be notified through the emails on their phone.
They can then log on to the HeatNet Online website (from
their phone) to determine the trouble. Sample email
message:

HeatNet Online Alert

WB1250 Fault

High
Limit

May 17 2014
11:09AM

WVHID99999

View Alert
Data

Once the user has logged in, a selection screen for the
building sites the user has registered will be displayed.
When a building site is selected, the Main Live screen will
be entered. This is the HOME screen and provides a quick
view on the status of the site.

Selecting the History tab allows a runtime Histogram of the
system. The histogram displays temperatures and states of

the system in a date/time format. Also displayed is the
Master boiler log, faults, messages, modulation, and events.
To the right of the histogram is the Master Boiler’s log.
Since the HeatNet bridge only transmits at 1-minute
intervals, the log can be used to precisely view the state of
the boiler at the time of the event (in-between minutes).

This screen is an excellent way to diagnose system
problems and tune systems for optimal performance.

Data Points can also be viewed in a manner other than a
histogram as pictured below. The date/time picker can be
used to mine the raw data stored on the HeatNet Online
server.

Runtime graphs of each boiler ensure even runtimes are
being observed by a properly operating system.

This is just an overview of HeatNet Online and a few of the
screens that are available.

«
...
70
71
72
73
74
...
»

Содержание HEATNET 3.0 Torus Series









































































































































Отзывы:

Нет отзывов

Похожие инструкции для HEATNET 3.0 Torus Series

Бренд: U.S. Boiler Company Страницы: 2

Бренд: U.S. Boiler Company Страницы: 104

Бренд: Daikin Страницы: 12

Бренд: Unical Страницы: 46

FORMAT.zip 25 Solar

Бренд: Sime Страницы: 96

Бренд: Gorenje Страницы: 24

Бренд: Arikazan Страницы: 38

Бренд: Kenmore Страницы: 30

Proteus Plus Blue 24 kW

Бренд: E.C.A. Страницы: 35

Бренд: E-Tech Страницы: 44

Бренд: Green Mountain Страницы: 36

Бренд: Clyde Страницы: 12

Бренд: Chaffoteaux & Maury Страницы: 20

CHALLENGER 30 BF

Бренд: Chaffoteaux & Maury Страницы: 24

Бренд: Viessmann Страницы: 12

Бренд: Vaillant Страницы: 72

sensoNET VR 921

Бренд: Vaillant Страницы: 196

Бренд: Rapido Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды