manualshive.com logo in svg

Razorweld Xcel-Arc MULTI 230 AC/DC, Руководство по эксплуатации, Страница: 58 / 72

Поделиться
Скачать
Razorweld Xcel-Arc MULTI 230 AC/DC Скачать руководство пользователя страница 58

Tungsten Electrodes

•  Tungsten is a rare metallic element used for manufacturing TIG welding electrodes. The TIG process relies on 

tungsten’s hardness and high-temperature resistance to carry the welding current to the arc. Tungsten has the 

highest melting point of any metal, 3,410 degrees Celsius.

•  Tungsten electrodes are non-consumable and come in a variety of sizes; they are made from pure tungsten or 

an alloy of tungsten and other rare earth elements.  Choosing the correct tungsten depends on the material 

being welded, the number of amps required and whether you are using AC or DC welding current.

•  Tungsten electrodes are colour-coded at the end for easy identification.
•  Below are the most commonly used tungsten electrodes found in the New Zealand and Australian market.

Thoriated 

Thoriated tungsten electrodes (AWS classification EWTh-2) contain a minimum of 97.30 per cent tungsten and 

1.70 to 2.20 per cent thorium and are called 2 per cent thoriated. They are the most commonly used electrodes 

today and are preferred for their longevity and ease of use. Thorium, however, is a low-level radioactive hazard 

and many users have switched to other alternatives. Regarding the radioactivity, thorium is an alpha emitter, but 

when it is enclosed in a tungsten matrix, the risks are negligible. Thoriated tungsten should not get in contact 

with open cuts or wounds. The more significant danger to welders can occur when thorium oxide gets into the 

lungs. This can happen from the exposure to vapours during welding or ingestion of material/dust in the grinding 

of the tungsten. Follow the manufacturer’s warnings, instructions, and the Material Safety Data Sheet (MSDS) 

for its use.

E3 (Colour Code: Turquoise) 

E3 tungsten electrodes (AWS classification EWG) contain a minimum of 98% percent tungsten and up to 1.5 

percent Lanthanum and small percentages of Zirconium and Yttrium they are called E3 Tungsten. E3 Tungsten 

Electrodes provide conductivity similar to that of thoriated electrodes. Typically, this means that E3 Tungsten 

Electrodes are exchangeable with thoriated electrodes without requiring significant welding process changes. 

E3 deliver superior arc starting, electrode lifetime, and overall cost-effectivenes. When E3 Tungsten Electrodes 

are compared with 2% thoriated tungsten, E3 requires fewer re-grinds and provides a longer overall lifetime. 

Tests have shown that ignition delay with E3 Tungsten Electrodes actually improves over time, while 2% thoriated 

tungsten starts to deteriorate after only 25 starts. At equivalent energy output, E3 Tungsten Electrodes run 

cooler than 2% thoriated tungsten, thereby extending overall tip lifetime. E3 Tungsten Electrodes work well on 

AC or DC. They can be used DC electrode positive or negative with a pointed end, or balled for use with AC 

power sources.

Ceriated (Colour Code: Gery) 

Ceriated tungsten electrodes (AWS classification EWCe-2) contain a minimum of 97.30 per cent tungsten and 

1.80 to 2.20 per cent cerium and are referred to as 2 per cent ceriated. Ceriated tungstens perform best in DC 

welding at low current settings. They have excellent arc starts at low amperages and become popular in such 

applications as orbital tube welding, thin sheet metal work. They are best used to weld carbon steel, stainless 

steel, nickel alloys, and titanium, and in some cases, it can replace 2 per cent thoriated electrodes. Ceriated 

tungsten is best suited for lower amperages it should last longer than Thoriated tungsten higher amperage 

applications are best left to Thoriated or Lanthanated tungsten.

Lanthanated (Colour Code: Gold) 

Lanthanated tungsten electrodes (AWS classification EWLa-1.5) contain a minimum of 97.80 per cent tungsten 

and 1.30 per cent to 1.70 per cent lanthanum and are known as 1.5 per cent lanthanated. These electrodes have 

excellent arc starting, a low burn-off rate, good arc stability, and excellent re-ignition characteristics. Lanthanated 

tungstens also share the conductivity characteristics of 2 per cent thoriated tungsten. Lanthanated tungsten 

electrodes are ideal if you want to optimise your welding capabilities. They work well on AC or DC electrode 

negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated 

tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or 

AC from square wave power sources.

Zirconiated (Colour Code: White) 

Zirconiated tungsten electrodes (AWS classification EWZr-1) contain a minimum of 99.10 per cent tungsten and 

0.15 to 0.40 per cent zirconium. Most commonly used for AC welding Zirconiated tungsten produces a very 

stable arc and is resistant to tungsten spitting. It is ideal for AC welding because it retains a balled tip and has 

a high resistance to contamination. Its current-carrying capacity is equal to or greater than that of thoriated 

tungsten. Zirconiated tungsten is not recommended for DC welding.

DC TIG WELDING GUIDE

58

Содержание Xcel-Arc MULTI 230 AC/DC









































































Отзывы:

Нет отзывов