Razorgage Cyclone RazorOptimal, Руководство пользователя

Страница: 6 / 55

Cyclone RazorOptimal User Manual
6 | P a g e
Technical Services, Inc.
Safety Rules for Cut-off Saw
WARNING
The operator must thoroughly read and
understand this manual before operating the
saw or starting any servicing. All safety and
warning instructions should be followed.
This manual must be available to all
operators.
1. Read and understand the operation manual before operation.
2. Keep hands away from the cutting area.
3. Before making any adjustments disconnect all power sources including electrical and
pneumatic.
4. Minimum air pressure is 50 psi, DO NOT operate saw if minimum air pressure is not available.
Normal working pressure is 80psi.
5. At the start of each work session turn on saw and cycle the saw and check for normal
operation of top clamp and blade advance cylinders. Turn off saw and as the motor slows and
comes to a stop check for correct rotation direction compared to arrow indicator.
6. Do not cut warped wood; work piece should lay flat on table without rocking.
7. Use infeed and outfeed supports when cutting long work pieces.
8. Set top clamp to minimum close height for material being processed.
9. Short trim scraps should only be removed by pushing them out with a scrap piece and NOT
with hands.