background image

HEADLINE

Need Help?

 Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information 

at 

www.razor.com

. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer 

Service contact information is listed at the back of this manual.

7

USAGE

B

A

C

 How to Operate

Do not activate the twist-grip throttle unless you are on the Rambler 20 and in a safe, outdoor environment suitable for riding. 

The throttle can be activated as soon as the power button turns the product on.

 How to Ride

Once you have inflated the tires (see page 4) and charged the battery (see page 5):

1.  Put kickstand up.
2.  Sit on the Rambler 20 with both feet on the ground on either side of the frame to balance the product.
3.  Place both hands on the handlebars.
4.  Turn power “ON” by pressing the power button 

(A)

 for two seconds. The display will light up.

5.  Select speed mode. See page 8 for instructions.
6.  The Rambler 20 default mode is the neutral mode. To activate the electric assist mode, toggle the display by pressing the top area of the display to change 

power level mode (see page 8).

7.  Option 1 – Push off and pedal like a bicycle. Pedal assist function will activate automatically. 

Option 2 - Twist the throttle 

(B) 

with right hand. Place feet on foot pedals once Rambler 20 is in motion.

Note:

 Keep both feet on the foot pedals while the Rambler 20 is in motion.

Headlight and Taillight:

 To activate the headlight and taillight the product must be powered 

ON

. Press the light button 

(C)

 once to activate the headlight 

and taillight. To deactivate the headlight and taillight, press the light button once again.

Power Button 

(A)

Light Button 

(C)

 How to Use Electric Pedal Assist and Twist-Grip Throttle Features

The Rambler 20 is a Class 2 E Bike and can be powered by your choice of pedal assist or using the twist-grip throttle.

Electric Pedal Assist

Electric pedal assist will engage the motor and help you while you are pedaling. To engage electric pedal assist, start by switching to a power level mode 

by pressing the top area of the display to increase the power level (see page 8). When all the bars on the display are off, the Rambler 20 is at power level 

0 (neutral). Start pedaling and the Rambler 20 will automatically activate the motor and assist you. As you increase the power level on the display, you can 

expect the electric bike to react with more power to assist you, ultimately resulting in higher speeds. When you stop pedaling or coast the electric pedal assist 

will also stop and wait for you to start pedaling again.

Throttle Assist

The electric assist feature can also be activated by utilizing the twist-grip throttle on the right-hand grip. When any power level is enabled on the display, the 

throttle is active and available to use at any time, including while you are pedaling. The throttle is variable speed and uses the full power range regardless 

of the power level setting on the display. Regulate your power and speed by adjusting how much you twist throttle. Using a combination of pedal assist and 

throttle assist can be helpful when quick bursts of power or speed are needed.

Содержание rambler 20

















Отзывы: